Welcome to Hydraulic 911, our recap of important projects that we’ve worked on over the last month, including hydraulic repair jobs. Each project highlights our commitment to customer service, use of OEM parts for all hydraulic repairs and our ability to work with customers all over the world.
For November 2016, we have four projects to tell you about:
- Brueninghaus A10V O 71 DFR1/31-LPSC62K04 to Crane Service
- Bosch Rexroth Solenoid Coils to Singapore
- Shims for Parker Series Pump
- Rebuilt Bosch Rexroth Motor AA2FM250/60W-VSD510
- Bosch Rexroth AA2FM63/61W-VTD510 Motor for Fecon BH74SS Masticator
Brueninghaus A10V O 71 DFR1/31-LPSC62K04 to Crane Service
Ron contacted us from Utah in need of an urgent pump repair. His business specializes in heavy equipment cranes and he needed a consultation for a worn-down pump—the Brueninghaus A10V O 71 DFR1/31-LPSC62K04. After learning more from Ron and assessing the pump’s condition, we decided that a rebuilt pump was the best solution.
Ron shipped us his used pump and once it arrived here in Wooster, our technicians got straight to work. They tested and inspected the pump to highlight the problem areas. Once they decided on what needed repaired and what needed replaced, our technicians located additional parts in our warehouse that would help improve Ron’s pump. By combining the new, remanufactured, and original parts, our technicians rebuilt the pump for Ron quickly and efficiently.
After they cleaned it and tested the pump, the technicians shipped the pump westward to Ron who reinstalled it and put the pump to good use.
Bosch Rexroth Solenoid Coils to Singapore
Our expertise and skills stretch far beyond our warehouse in Wooster, Ohio. Hydraulic systems are used all around the world, and our technicians are ready to assist wherever there is an issue—including half way around the world.
Herry reached out to us from Singapore looking for new coils for some of his equipment. He needed 10 Bosch Rexroth Solenoid Coils 220vdc R901008688, 4WE 6 D62/EG220N9K4. He also specified Pmax: 350 bar and 30 Watt. Our technicians were able to locate the pieces Herry needed and prepared to ship them to him in Singapore.
Because of our history and expertise in international markets, we were able to get the parts to Herry without a hassle. Once he received his new parts, he installed them and could resume normal operations.
Shims for Parker Series Pump
In addition to complete pumps and units, we also have a large variety of individual parts in our inventory. These are essential to making sure your hydraulic operations are working efficiently.
Timothy reached out to us in need of some new shims for his Parker series F11 pump. He had replaced the pistons on his pump and put on new O-rings on the guide spacers. However, when performing the final torque, the gear clearance disappears and the pump is unable to rotate. He knew proper shims would help this problem, and specifically inquired about shims 3797413, 3797414, and 379415.
After looking through our inventory, we were able to locate a piece that would help fix Timothy’s rotation issue. After we shipped it to him, he installed the shims and the pump was able to work properly.
Rebuilt Bosch Rexroth Motor AA2FM250/60W-VSD510
Gene reached out to us in need of a Bosch Rexroth Motor AA2FM250/60W-VSD510. This specific motor was fairly new, but had recently been causing Gene some problems during production. Gene called to see if our technicians could take a look and see what was causing the disruptions.
Once he sent us the pump, our skilled team inspected the unit and tried to solve what was causing the problem. We were able to locate the issue, and decided the best solution for Gene was to repair it here in our warehouse then ship it back to Gene.
After our technicians made the repairs, tested and cleaned the pump, they sent it to Gene. He then installed it and noted that his production had returned to its normal efficiency. Sometimes it takes just a small adjustment or a quick repair to make a big difference.
Bosch Rexroth AA2FM63/61W-VTD510 Motor for Fecon BH74SS Masticator
Tammy often works with large forestry equipment that helps clear trees, mulch landscape and more. She contacted us because she needed a replacement for a motor on her Fecon BH74SS masticator.
She specifically needed a Bosch Rexroth AA2FM63/61W-VTD510 motor. This particular motor turns the grinding wheel in the masticator, so it is essential for the operation that this motor is in proper working condition.
Our technicians were able to find a used motor in our inventory. They repaired the motor, cleaned it and inspected it—making sure it’s as good as new. Once it got the seal of approval, it was on its way to Tammy. She was able to replace the motor on the grinding wheel, which allowed the masticator to work properly again.